How to Replace a Power Mirror in a Toyota Highlander

Changing a power mirror in a Toyota Highlander is not an easy job. While the replacement of the mirror is simple, taking the entire door panel off to access the electrical cords makes this job a big project. Find a trim tool necessary to remove the door panel at your local auto parts store.

Difficulty:

Moderately Challenging

Instructions

things you'll need:

• Wrench
• Screwdriver
• Trim tool

1. Remove the Old Mirror

   • 1

     Disconnect the negative battery cable.

   • 2

     Pry the window and lock switch from the door panel using a screwdriver covered in a cloth or a trim tool being careful not to cause damage. Disconnect the electric cords to the switches once removed.

   • 3

     Remove the entire door panel by starting with the door handle. Work your way around the outside of the door and loosening the screws.

   • 4

     Take the clips out around the entire door using your door trim panel tool. Pull door panel from the door.

   • 5

     Disconnect the power mirror cord from the connection in the door panel of the Highlander.

   • 6

     Take out the screws holding the mirror in place and remove the old mirror.

   Install the New Mirror

   • 1

     Put the new mirror into place. Tighten the screws that attach the mirror to the door panel.

   • 2

     Re-connect the power mirror cord to the cord on the door panel.

   • 3

     Install the mirror cover. Attach the door panel using the clips.

   • 4

     Tighten all screws and install the screw caps in the reverse order on the Highlander.

   • 5

     Connect the battery, and try your power mirror to make sure it works.

Tips & Warnings

• Connect the battery and test the power mirror before tightening down the door panel of your Toyota Highlander. This allows faster access if you need to check over your installation.

• Warranties in most vehicles, including the Highlander, are void if you repair any part of the vehicle yourself.